Concrete
CONCRETE IN Piedmont, Berkeley, and Oakland, CA
Every solid structure on your property starts as a wet, gray pour that has one chance to be right. Paradigm Concrete & Construction Inc handles concrete work in Piedmont, Berkeley, and Oakland, CA, from flatwork and structural slabs to tear-outs and replacements. Our crews carry 60+ years of combined experience, Diamond Certified recognition since 2008, and a 1-year warranty available on paving.


THE WORK YOU NEVER SEE DECIDES WHAT YOU DO.
Subgrade compaction, base thickness, moisture barriers, steel placement, joint layout. None of it shows up in a photograph, and all of it decides whether your slab is still flat in 15 years. We spend real time and money on that hidden half of the job because the visible half cannot fix a failure underneath it.
That is also why we walk every site before quoting anything. Soil, slope, access, and existing drainage all change the build, and a number given over the phone ignores every one of them.
✓ Compacted, graded base under every pour
✓ Rebar or mesh sized to the actual load
✓ Control joints laid out before the pour begins
✓ Written scope and schedule before we start
CONCRETE
ONE MATERIAL, EVERY SURFACE YOUR PROPERTY NEEDS.
Concrete moves easily between roles. The same material becomes the driveway you park on, the patio you eat on, the footing under a new addition, and the wall holding back a slope. That flexibility is exactly why the details matter so much, because a mix and thickness that suits a garden path will fail badly under a delivery truck. We match the specification to the actual use, every time.
EAST BAY SOIL WRITES ITS OWN RULES.
Antioch sits at the edge of the Delta, where expansive clay swells with winter rain and shrinks hard through summer. Slabs poured without accounting for that movement telegraph it within a season or two. We adjust base depth, reinforcement, and joint spacing for the ground we are actually standing on, and we grade so water leaves the slab instead of sitting beside it.
60 YEARS OF COMBINED EXPERIENCE POURED INTO EVERY SLAB.
Our team has 60+ years of combined concrete and construction work behind it, and that history shows up in small decisions: when to pour early to beat heat, when to wait out a storm, how to read a subgrade that looks fine but is not. Diamond Certified has rated us Highest Quality since 2008, and the Better Business Bureau lists us as a member. Want a second opinion on a slab you are unsure about?
WHAT A PROPERLY BUILT POUR GIVES BACK
FLATNESS THAT HOLDS
Furniture sits level, doors clear the threshold, and water runs where it should. A slab finished to a true plane stays that way when the base under it was compacted correctly, and you stop noticing it entirely after the first year.
CRACKS THAT STAY HIDDEN
Shrinkage is unavoidable, but its appearance is not. Joints placed at the correct spacing pull cracking down into tooled lines where nobody reads it as damage, keeping the surface looking deliberate rather than neglected and tired year after year.
LOAD CAPACITY YOU CAN TRUST
Parking a loaded truck on a slab designed for foot traffic is how panels break. Matching thickness and reinforcement to real use means you never have to think about what you are allowed to drive across your own property.
DRAINAGE BUILT INTO THE SURFACE
Water that leaves quickly cannot soak the subgrade, freeze in a joint, or pool against a wall. Correct slope is designed at the forming stage, and it quietly prevents most of the problems that ruin residential flatwork later on.
FINISHES SUITED TO THE SPACE
A broom texture grips underfoot on a wet driveway, while a smoother trowel suits a covered patio. Choosing the finish for how the surface gets used beats choosing it from a catalog photograph you happened to like once.
RESALE VALUE THAT SURVIVES INSPECTION
Buyers and inspectors look hard at flatwork and foundations. Sound, level, well-drained concrete removes an easy negotiating point from the table, and it signals that the rest of the property was probably maintained to the same standard.

WHAT WE POUR
OUR CONCRETE WORK
Most jobs fall into one of these six categories, and plenty combine two or three. Tell us what the space needs to do and we will tell you which approach actually fits it.

NEW POURS
New Concrete Pours
Fresh installations start with excavation, base rock, and compaction before a single form goes up. Reinforcement gets tied at the correct height, then the mix is placed, screeded, floated, and finished to the texture the surface calls for.

TEAR OUT
Concrete Removal and Replacement
Old slabs come out cleanly with saw-cut edges, and the debris leaves the site the same day where access allows. Rebuilding gives us the chance to correct the base and drainage problems that quietly killed the original slab.

PATTERN WORK
Stamped Concrete
Color hardener and release powder go down while the surface is still workable, then mats press the pattern into the slab. Slate, ashlar, wood plank, and cobble textures all read convincingly once the protective sealer finally goes on.

STONE FACE
Exposed Aggregate Finishes
Washing back the surface paste uncovers the stone inside the mix, producing a textured, naturally slip-resistant finish. It hides staining better than smooth troweling and holds up well on pool surrounds, walkways, and sloped approaches around the house.

SURFACE FIX
Concrete Repair and Resurfacing
Spalling, scaling, and isolated cracking often respond to routing, patching, and an overlay rather than full removal. We assess whether the base below is sound first, since resurfacing a moving slab only buys you a very short reprieve.

LAST STEP
Concrete Sealing
Penetrating and film-forming sealers each have a place, and the right pick depends on exposure, finish, and traffic. Sealing slows water absorption, protects color, and makes oil, leaf tannin, and rust marks far easier to remove later.
THE WORD ON OUR WORK
WHAT OUR CLIENTS SAY.
Concrete is hard to evaluate from the curb, so the people who have already lived with ours are the best source you have. Their reviews cover scheduling, site cleanliness, communication, and how the finished surface looked after the first full winter of rain.
Concrete questions tend to repeat, so here are direct answers on mixes, thickness, timing, and reinforcement before you decide how to approach the work on your own property.
Common Questions
frequently asked
questions.
Concrete questions tend to repeat, so here are direct answers on mixes, thickness, timing, and reinforcement before you decide how to approach the work on your own property.
What is the difference between concrete and cement?
Cement is one ingredient; concrete is the finished material. Portland cement binds sand, gravel, and water into a solid mass, so asking for a cement driveway is a little like asking for a flour cake.
What PSI concrete should be used for residential flatwork?
Most residential slabs, walkways, and patios use a mix in the 3,000 to 4,000 PSI range. For driveways and structural work around Antioch, CA, Paradigm Concrete & Construction Inc specifies the upper end of that range or above.
How soon after pouring can concrete get wet?
Light moisture after the surface has set is usually harmless and can even help curing. Heavy rain within the first 4 to 8 hours can wash out the surface paste, so we watch forecasts and cover work.
Why does new concrete look blotchy as it dries?
Uneven drying, subgrade moisture, and variations in finishing timing all shade the surface differently for several weeks. Most mottling evens out as the slab releases moisture, and a sealer applied afterward blends the remaining variation.
Can concrete be poured in hot weather?
Yes, with adjustments. We pour early, dampen the subgrade, use retarders where needed, and start curing immediately, because a mix that stiffens too fast loses strength and leaves a weak, dusty surface behind.
What is the difference between a broom finish and a trowel finish?
A broom finish drags bristles across the surface to create traction, which suits driveways, walkways, and pool decks. A steel trowel finish leaves a dense, smooth surface better suited to garages and covered interior slabs.
What causes concrete to flake or scale at the surface?
Scaling usually traces to too much water in the mix, finishing while bleed water is still present, or curing that stopped too early. Deicing salts and freeze cycles accelerate it once the surface has already weakened.
Why should I hire Paradigm Concrete & Construction Inc for concrete work?
We control the whole job, from base preparation through the final finish, with our own crews rather than subcontracted labor. Property owners across Antioch, CA hire us because that continuity is what keeps a pour consistent.
HOW WE WORK
FROM FIRST WALKTHROUGH TO FINAL SWEEP, HERE IS HOW.
STEP 01
WE WALK THE SITE
Someone comes out, measures, checks access for trucks, looks at how water currently moves, and probes the existing base. Photographs and dimensions go back to the office so the estimate reflects your property rather than an average one.
STEP 02
WE PUT NUMBERS ON PAPER
You receive a written estimate within 2 business days listing thickness, mix, reinforcement, finish, and square footage. Nothing hides in a line item called miscellaneous, and questions get answered before you are asked to commit.
STEP 03
WE HANDLE PERMITS
Where the work needs a permit or a city inspection, we identify it early and manage the paperwork. Scheduling inspections around pour days keeps the job moving instead of leaving forms sitting open through a rainy week.
STEP 04
WE BUILD THE BASE
Demolition, excavation, and haul away come first, then base rock goes down in lifts and gets compacted. Forms are set to line and grade, and reinforcement is tied and chaired at the correct height above the subgrade.
STEP 05
WE POUR AND FINISH
Concrete is placed, screeded, bull floated, and edged, then finished to the agreed texture once bleed water leaves. Control joints are cut on a spacing that suits the slab thickness rather than a habit.
STEP 06
WE CURE AND CLEAR OUT
Curing compound or wet curing protects the surface through its critical first days. We remove forms, sweep the site, haul the last of the debris, and walk the finished work with you before anyone leaves.
Get Your Free Estimate
TELL US WHAT YOU WANT POURED, AND THE ESTIMATE IS FREE.
Send the address, a rough size, and a photo of the area through our contact page. We will come out, measure properly, and return a written scope within 2 business days with no obligation.
WHAT YOUR ESTIMATE COVERS:
✓ Slab thickness, mix design, and reinforcement specified
✓ Base preparation and compaction included in the price
✓ Joint layout and finish texture agreed before pouring
✓ Demolition, haul away, and site cleanup accounted for
✓ Permit and inspection needs identified up front
✓ A 1-year warranty available on paving work
